AN ANDROID APPLICATION BASED EMERGENCY OVERHEAD LINE DEACTIVATING SYSTEM FOR THE PROTECTION OF POWER SYSTEM COMPONENTS
project center in Tirunelveli
In a power system network the
overhead lines are playing the vital roles to transmit the power to the consumers
and also it should treated very precisely. Because the serious damages on these
overhead lines may create the voltage, current surges and moreover it may
spread the arc waves through the lines. These disturbances may travel into
other healthy feeders as well as connected load. This project is proposing a
novel inspection and control embedded system for the overhead power lines. This
project is individually monitoring the voltage, current, temperature and
humidity of the transmission line of concern. The above mentioned parameters
are the key factors for the transmission line faults (either short circuit (or)
insulation failure) so the proposed system is closely monitoring the above
parameters. If there any violation in these parameters, the system immediately
alerting the control room. The control room technician may use the android
application to on/off the circuit breaker. The control signal is recognized and
then transmitted through the wireless communication. The circuit breaker on the
field is responsible to trip off the concern line. Thus the proposed system is
fully utilizing the embedded system as well as wireless communication protocol
to safeguard the whole power system network from the serious accident. This
system is dipping the man effort by means of android application interface.
Comments
Post a Comment